Search found 29 matches

by Mistahnash
Mon Apr 22, 2019 10:30 pm
Forum: Engine, Driveline, Suspension & Steering
Topic: 1948 Standard 8 Overdrive Issue.
Replies: 28
Views: 2295

Re: 1948 Standard 8 Overdrive Issue.

Its been a while but I have been trying to slowly figure out the OD with no success. Moved on to tune up and fluid changed and all that kind of stuff. Now im back to the OD and at the moment Im trying to figure out which terminals on the solenoid should have constant power with the key on and number...
by Mistahnash
Sun Apr 07, 2019 7:56 pm
Forum: Wanted & For Sale
Topic: Wanted 1953 Packard Coupe Driver Door+Hinges
Replies: 6
Views: 261

Re: Wanted 1953 Packard Coupe Driver Door+Hinges

Let the ride decide wrote:
Sat Apr 06, 2019 6:53 pm
What about Max Merritt?

Is it a 53 clipper only door?
Would a 51-54 Clipper door work?

I think a 51-54 works it just has to have the trim going all the way down the door. I know some dont have the trim all the way down.
by Mistahnash
Wed Apr 03, 2019 8:49 am
Forum: Wanted & For Sale
Topic: Wanted 1953 Packard Coupe Driver Door+Hinges
Replies: 6
Views: 261

Re: Wanted 1953 Packard Coupe Driver Door+Hinges

Neither place has a door, unfortunately
by Mistahnash
Mon Apr 01, 2019 8:18 am
Forum: Wanted & For Sale
Topic: Wanted 1953 Packard Coupe Driver Door+Hinges
Replies: 6
Views: 261

Re: Wanted 1953 Packard Coupe Driver Door+Hinges

Michigan, ill look into those.

Thanks!
by Mistahnash
Sun Mar 31, 2019 11:01 pm
Forum: Wanted & For Sale
Topic: Wanted 1953 Packard Coupe Driver Door+Hinges
Replies: 6
Views: 261

Wanted 1953 Packard Coupe Driver Door+Hinges

Unfortunately our driver side door got hit while open and tweaked the door pretty good. May be savable but figured I would try to locate a solid replacement and see what would be more cost efficient.

Thanks, Zach
by Mistahnash
Sat Jan 05, 2019 3:01 pm
Forum: Engine, Driveline, Suspension & Steering
Topic: 1948 Standard 8 Overdrive Issue.
Replies: 28
Views: 2295

Re: 1948 Standard 8 Overdrive Issue.

I found the vacuum hose that is suppose to lead to the wiper motor, was just missing the small section of rubber vacuum hose that leads from the hard line to the wiper motor. I also think I found why the wipers seemed to be stuck, the cable leading from the nob on top of the dash is totally seized u...
by Mistahnash
Sat Jan 05, 2019 1:25 pm
Forum: Engine, Driveline, Suspension & Steering
Topic: 1948 Standard 8 Overdrive Issue.
Replies: 28
Views: 2295

Re: 1948 Standard 8 Overdrive Issue.

Sorry for the delayed response, I have been busy and am just now getting back to the Packard. The car reverses just fine no matter where the nob is. I spent a few hours cleaning the trans of grim and dirt just to be able to see what im working with down there. I just fixed a grounding issue I was ha...
by Mistahnash
Mon Oct 22, 2018 9:09 pm
Forum: Engine, Driveline, Suspension & Steering
Topic: 1948 Standard 8 Overdrive Issue.
Replies: 28
Views: 2295

Re: 1948 Standard 8 Overdrive Issue.

Also is it ok to drive it around with the overdrive not working. Like I mentioned before it seemed to be revving pretty high around 40mph. Haven't really tried pushing it past that.
by Mistahnash
Mon Oct 22, 2018 9:05 pm
Forum: Engine, Driveline, Suspension & Steering
Topic: 1948 Standard 8 Overdrive Issue.
Replies: 28
Views: 2295

Re: 1948 Standard 8 Overdrive Issue.

The issue with the relay not coming on was the reverse lock out switch. It was causing alot of resistance no matter how I adjusted it. I bypassed it and got the relay to trigger with a ground on terminal 5. The light on the dash comes on and both relays work. Light doesn't come on when driving aroun...
by Mistahnash
Thu Oct 18, 2018 6:05 am
Forum: Engine, Driveline, Suspension & Steering
Topic: 1948 Standard 8 Overdrive Issue.
Replies: 28
Views: 2295

Re: 1948 Standard 8 Overdrive Issue.

Well I found an issue, im hoping its whats causing the issue. Number 3 terminal on the solenoid is only getting 5.56 volts. Number 4 is getting 7.6 volts. Its getting full voltage up to the plug under the car but not after. I tried cleaning the plug but it didn't seem to help. Going to try again the...