Burr Ripley oil filter

Discussions related to motor & gear oils, greases, anti-freezes, etc.
DrMorbius
Posts: 137
Joined: Sun Jul 17, 2016 7:25 am
Location: Long Island, NY

Burr Ripley oil filter

Post by DrMorbius » Sun Aug 07, 2016 11:39 am

Hi, I seem to be having a tiny bit of trouble with my oil filter. It's now going on one gallon of fresh oil on my garage floor. Since I couldn't locate a new Burr Ripley filter I put the old one back in. (I called R & A Engineering and it's going to take 8 weeks to get their newer filter adapters in stock to sell). The old one must be missing a piece because the oil comes out the seam between the 2 halves of the L8 canister. Does anyone have any experience with the Burr Ripley filter? By the way the seam between the 2 halves that the filter lies in does not screw together like R & A Engineering canister, any little pressure will cause it to leak from the filter to the seam and then on to the engine, chassis and floor.

Dave Czirr
Moderator
Posts: 4961
Joined: Tue Jun 16, 2009 5:30 am
Location: New Jersey

Re: Burr Ripley oil filter

Post by Dave Czirr » Sun Aug 07, 2016 3:38 pm

You've missed the operating concept of the Ripley unit; the interior of the canister should contain no oil, that's why there is no seal. The oil outlet is direct to the oil cooler inlet via a threaded fitting used to modify the spin on element, that fitting was welded by Ripley to the cartridge. The upper half of the Ripley unit plays no functional role, it's just a black plastic cosmetic cover over the internal spin-on cartridge.

A very large %-age of all 34-39 senior Packards in service today use the Ripley unit. Completely trouble free but you MUST use a spin on modified as per the Ripley scheme. This unit is really very simple yet I don't think I've done a good job explaining it. If you're still confused by it we could speak on the phone. If you want a call send me a PM with your phone#. Or perhaps some photos would help you?

Don R's Cars
Posts: 194
Joined: Thu Feb 28, 2013 8:21 pm

Re: Burr Ripley oil filter

Post by Don R's Cars » Mon Aug 08, 2016 6:33 am

Here are some pics of the Ripley filter if it helps:
Attachments
DSCF4245.JPG
DSCF4247.JPG
DSCF4248.JPG
DSCF4249.JPG
Don Rundgren
McKinney, Texas
1934 1100 Eight Sedan

DrMorbius
Posts: 137
Joined: Sun Jul 17, 2016 7:25 am
Location: Long Island, NY

Re: Burr Ripley oil filter

Post by DrMorbius » Mon Aug 08, 2016 12:23 pm

Here's mine............... looks the same as your's Don except for the end fittings.

DrMorbius
Posts: 137
Joined: Sun Jul 17, 2016 7:25 am
Location: Long Island, NY

Re: Burr Ripley oil filter

Post by DrMorbius » Mon Aug 08, 2016 12:47 pm

My pictures won't load, says file too big - and I took them again in a smaller sized format. That's the smallest I can make them with this camera..

DrMorbius
Posts: 137
Joined: Sun Jul 17, 2016 7:25 am
Location: Long Island, NY

Re: Burr Ripley oil filter

Post by DrMorbius » Mon Aug 08, 2016 1:50 pm

Don, could you show a photo of the bottom of your oil filter where it spins onto the center hole, does it look like a normal filter bottom?

Thanks,
Steve

DrMorbius
Posts: 137
Joined: Sun Jul 17, 2016 7:25 am
Location: Long Island, NY

Re: Burr Ripley oil filter

Post by DrMorbius » Mon Aug 08, 2016 7:02 pm

IMG_0572.JPG
Trying again -

DrMorbius
Posts: 137
Joined: Sun Jul 17, 2016 7:25 am
Location: Long Island, NY

Re: Burr Ripley oil filter

Post by DrMorbius » Mon Aug 08, 2016 7:04 pm

IMG_0577.JPG
and again-

DrMorbius
Posts: 137
Joined: Sun Jul 17, 2016 7:25 am
Location: Long Island, NY

Re: Burr Ripley oil filter

Post by DrMorbius » Mon Aug 08, 2016 7:05 pm

IMG_0573.JPG

DrMorbius
Posts: 137
Joined: Sun Jul 17, 2016 7:25 am
Location: Long Island, NY

Re: Burr Ripley oil filter

Post by DrMorbius » Mon Aug 08, 2016 7:06 pm

IMG_0574.JPG

Post Reply