1932 Sparton Horn Housing

General topics, not covered elsewhere, of all things Packard.
Post Reply
cyski500
Posts: 6
Joined: Wed Jun 06, 2018 6:08 am
Location: Ohio

1932 Sparton Horn Housing

Post by cyski500 » Thu Feb 28, 2019 2:47 pm

Both horn housings on my 32 503 have broken off from the 90 degree fitting which attached to the bugle part of the horn. Does anyone know a possible source for a replacement housing? My other option is to have a fine threaded nipple fabricated and welded to the housing. It appears to be a nominal 3/4" pipe with 27 tpi straight thread (which I believe to be light fixture thread) and I have not been able to located anything similar. Or has anyone else experienced this and have an alternate solution?

Thanks
Terry
IMG_0506 - Copy.JPG
IMG_0510 - Copy.JPG
IMG_0512 - Copy.JPG

Post Reply