Roof mount Antenna Series 23

General topics, not covered elsewhere, of all things Packard.
Post Reply
packen
Posts: 1
Joined: Sun Jan 10, 2021 8:48 pm

Roof mount Antenna Series 23

Post by packen » Sun Jan 10, 2021 9:25 pm

I am trying to assemble the roof antenna on my Station Sedan. The antenna was removed years ago, and although I thought I had all the parts, based on
the exploded view I found on another post, it appears I'm missing lead-in rod, the trim nuts, washer, bushing and antenna lead-in. I have the wire that connects to the radio with a brass nut on it, but have no idea where the lead-in rod and nuts go.
This has been a years long project and unfortunately the person who disassembled these items is no longer with us, so I am left trying to figure out how to connect the antenna to the radio.
Any help with an explanation and possible leads on the parts I am missing would be greatly appreciated.
exploded view.jpg
exploded view.jpg (17.18 KiB) Viewed 239 times

Post Reply