Wanted 1953 Packard Coupe Driver Door+Hinges

No commercial advertisers, please.
Post Reply
Mistahnash
Posts: 29
Joined: Mon Sep 10, 2018 7:42 pm

Wanted 1953 Packard Coupe Driver Door+Hinges

Post by Mistahnash » Sun Mar 31, 2019 11:01 pm

Unfortunately our driver side door got hit while open and tweaked the door pretty good. May be savable but figured I would try to locate a solid replacement and see what would be more cost efficient.

Thanks, Zach

Howard56
Posts: 1117
Joined: Mon Dec 24, 2012 11:35 am

Re: Wanted 1953 Packard Coupe Driver Door+Hinges

Post by Howard56 » Mon Apr 01, 2019 8:01 am

No idea where you are located but if someone with a parts car close by cannot help Kanter posted photos showing many doors stacked in their warehouse and Gerry at Packards Southwest in San Diego posted photos of his warehouse with what appeared to be some 51-4 doors visible. gerry@packardssouthwest.com

Mistahnash
Posts: 29
Joined: Mon Sep 10, 2018 7:42 pm

Re: Wanted 1953 Packard Coupe Driver Door+Hinges

Post by Mistahnash » Mon Apr 01, 2019 8:18 am

Michigan, ill look into those.

Thanks!

Mistahnash
Posts: 29
Joined: Mon Sep 10, 2018 7:42 pm

Re: Wanted 1953 Packard Coupe Driver Door+Hinges

Post by Mistahnash » Wed Apr 03, 2019 8:49 am

Neither place has a door, unfortunately

Howard56
Posts: 1117
Joined: Mon Dec 24, 2012 11:35 am

Re: Wanted 1953 Packard Coupe Driver Door+Hinges

Post by Howard56 » Thu Apr 04, 2019 3:49 pm

Sorry to hear that. You might also post your need in the parts wanted forum at www.packardinfo.com as there are several postwar people who frequent that forum and rarely visit this one. It probably wouldn't hurt to also post at the AACA Packard wanted forum although they seem to be more leaning to classic and prewar but maybe worth a shot.

Let the ride decide
Posts: 287
Joined: Sat Aug 28, 2010 11:04 am

Re: Wanted 1953 Packard Coupe Driver Door+Hinges

Post by Let the ride decide » Sat Apr 06, 2019 6:53 pm

What about Max Merritt?

Is it a 53 clipper only door?
Would a 51-54 Clipper door work?

Mistahnash
Posts: 29
Joined: Mon Sep 10, 2018 7:42 pm

Re: Wanted 1953 Packard Coupe Driver Door+Hinges

Post by Mistahnash » Sun Apr 07, 2019 7:56 pm

Let the ride decide wrote:
Sat Apr 06, 2019 6:53 pm
What about Max Merritt?

Is it a 53 clipper only door?
Would a 51-54 Clipper door work?

I think a 51-54 works it just has to have the trim going all the way down the door. I know some dont have the trim all the way down.

Post Reply