Page 1 of 1

Wanted 1953 Packard Coupe Driver Door+Hinges

Posted: Sun Mar 31, 2019 11:01 pm
by Mistahnash
Unfortunately our driver side door got hit while open and tweaked the door pretty good. May be savable but figured I would try to locate a solid replacement and see what would be more cost efficient.

Thanks, Zach

Re: Wanted 1953 Packard Coupe Driver Door+Hinges

Posted: Mon Apr 01, 2019 8:01 am
by Howard56
No idea where you are located but if someone with a parts car close by cannot help Kanter posted photos showing many doors stacked in their warehouse and Gerry at Packards Southwest in San Diego posted photos of his warehouse with what appeared to be some 51-4 doors visible. gerry@packardssouthwest.com

Re: Wanted 1953 Packard Coupe Driver Door+Hinges

Posted: Mon Apr 01, 2019 8:18 am
by Mistahnash
Michigan, ill look into those.

Thanks!

Re: Wanted 1953 Packard Coupe Driver Door+Hinges

Posted: Wed Apr 03, 2019 8:49 am
by Mistahnash
Neither place has a door, unfortunately

Re: Wanted 1953 Packard Coupe Driver Door+Hinges

Posted: Thu Apr 04, 2019 3:49 pm
by Howard56
Sorry to hear that. You might also post your need in the parts wanted forum at www.packardinfo.com as there are several postwar people who frequent that forum and rarely visit this one. It probably wouldn't hurt to also post at the AACA Packard wanted forum although they seem to be more leaning to classic and prewar but maybe worth a shot.

Re: Wanted 1953 Packard Coupe Driver Door+Hinges

Posted: Sat Apr 06, 2019 6:53 pm
by Let the ride decide
What about Max Merritt?

Is it a 53 clipper only door?
Would a 51-54 Clipper door work?

Re: Wanted 1953 Packard Coupe Driver Door+Hinges

Posted: Sun Apr 07, 2019 7:56 pm
by Mistahnash
Let the ride decide wrote:
Sat Apr 06, 2019 6:53 pm
What about Max Merritt?

Is it a 53 clipper only door?
Would a 51-54 Clipper door work?

I think a 51-54 works it just has to have the trim going all the way down the door. I know some dont have the trim all the way down.