Header bar for 1934 Convertible Victoria

No commercial advertisers, please.
Post Reply
ROXY VENDENA
Posts: 10
Joined: Sat Mar 07, 2020 9:08 am

Header bar for 1934 Convertible Victoria

Post by ROXY VENDENA » Sat Mar 07, 2020 9:16 am

Does anyone have a set of header bars for my 1934 Convertible Victoria? It's the foldable bar that fits on each side behind the windows and keeps the top fitting tight. They also keep the top side railings from rattling. Does anyone make reproductions? I think they used the same bars for a few years.
Thanks!
Roxy Vendena
303.888.0799
Screen Shot 2020-02-23 at 10.07.53 AM.png
Hewre is a picture of the header bar
(487.98 KiB) Downloaded 74 times

Jon34_1101-727
Posts: 15
Joined: Thu Jan 16, 2020 5:37 pm

Re: Header bar for 1934 Convertible Victoria

Post by Jon34_1101-727 » Sun Mar 22, 2020 12:43 pm

Where are you located? I could provide you with some pictures or dimensions if you're interested. Jon

ROXY VENDENA
Posts: 10
Joined: Sat Mar 07, 2020 9:08 am

Re: Header bar for 1934 Convertible Victoria

Post by ROXY VENDENA » Mon Mar 23, 2020 7:29 am

Hey Jon, I live in Denver, Co.
Any information you have would be appreciated
303.888.0799
Roxy

Jon34_1101-727
Posts: 15
Joined: Thu Jan 16, 2020 5:37 pm

Re: Header bar for 1934 Convertible Victoria

Post by Jon34_1101-727 » Mon Mar 23, 2020 4:20 pm

I'll take a look in the next few days and get back to you. Jon

ROXY VENDENA
Posts: 10
Joined: Sat Mar 07, 2020 9:08 am

Re: Header bar for 1934 Convertible Victoria

Post by ROXY VENDENA » Tue Mar 24, 2020 6:27 pm

Thanks Jon,
Looking forward to hearing from you.
Roxy

Jon34_1101-727
Posts: 15
Joined: Thu Jan 16, 2020 5:37 pm

Re: Header bar for 1934 Convertible Victoria

Post by Jon34_1101-727 » Mon Apr 13, 2020 10:38 am

Roxy, I texted some pictures today to the number you had given. Let me know if you received them, Jon

ROXY VENDENA
Posts: 10
Joined: Sat Mar 07, 2020 9:08 am

Re: Header bar for 1934 Convertible Victoria

Post by ROXY VENDENA » Mon Apr 13, 2020 11:14 am

DIDN'T GET ANYTHING
If you get a chance, please send the pictures to:
rfvendegna@gmail.com
I am interested in seeing the ends of the rods, and where the bottom end mounts.
I can see the indentation at the top, but there is nothing for it to fit into on the bottom.

Post Reply