hose clamps

Event information, news of current or recent events, and judging questions.
Post Reply
jimscharfeld
Posts: 3
Joined: Wed Jun 27, 2018 4:00 pm

hose clamps

Post by jimscharfeld » Wed Jun 27, 2018 4:04 pm

I need to know what are the correct hose clamps for my 1930 745, Thank you, and a picture if possible

GJBINSC
Posts: 109
Joined: Wed Jul 19, 2017 9:31 am

Re: hose clamps

Post by GJBINSC » Thu Jun 28, 2018 10:25 am

To my knowledge the same as the 32, photo attached. They are nickel plated and polished.
Attachments
1932 Engine2.jpg

Dave Czirr
Moderator
Posts: 4961
Joined: Tue Jun 16, 2009 5:30 am
Location: New Jersey

Re: hose clamps

Post by Dave Czirr » Thu Jun 28, 2018 11:17 am

I was ready to agree as to type or style, whether polished and nickel plated or just galvanized I haven't a clue.

However here's a pix of a 734 being restored by an extremely prestigious nationally recognized shop. The finished car was shown extensively and took top honors everywhere it was displayed, including IIRC 100 points at a CCCA Grand Classic so I'm inclined to believe the clamp style is correct for the 7th Series.
Attachments
Babinsky 3 3 2012 003.jpg

1935Packard
Posts: 27
Joined: Wed May 11, 2011 7:28 pm

Re: hose clamps

Post by 1935Packard » Thu Jul 05, 2018 1:45 pm

Would these also be the correct hose clamps for a 12th series senior car?

Dave Czirr
Moderator
Posts: 4961
Joined: Tue Jun 16, 2009 5:30 am
Location: New Jersey

Re: hose clamps

Post by Dave Czirr » Thu Jul 05, 2018 2:16 pm

I believe the correct ones for 1936 seniors is the same style as shown above on 1932, but I do question the "polished and nickel plated".

Post Reply