Transmission re-builders

Discussions related to engines, transmissions, rear axles, suspension & steering.
Post Reply
introinc
Posts: 10
Joined: Sat Aug 03, 2019 11:07 am

Transmission re-builders

Post by introinc » Thu Dec 19, 2019 6:04 am

Does anyone have any current experience with highly competent shops that can rebuild my '41 120 transmission? Thanks

Adam
Posts: 1078
Joined: Fri Sep 04, 2009 4:15 am
Location: lincolnshire, uk

Re: Transmission re-builders

Post by Adam » Thu Dec 19, 2019 6:22 am

What area are you in? It might help with the recommendations.
"Do not underestimate the English cousin.....they are not as stupid as they look!" - Signor Altabani in The Italian Job.

introinc
Posts: 10
Joined: Sat Aug 03, 2019 11:07 am

Re: Transmission re-builders

Post by introinc » Sun Feb 02, 2020 6:14 am

I am located in the state of Mississippi in the USA.

flackmaster
Posts: 205
Joined: Thu Aug 20, 2009 8:12 am

Re: Transmission re-builders

Post by flackmaster » Tue Feb 04, 2020 6:59 am

If your transmission includes the overdrive, PAC Member Bill Aske is THE right guy. Shipping is incidental to the cost of having the wrong guy.

introinc
Posts: 10
Joined: Sat Aug 03, 2019 11:07 am

Re: Transmission re-builders

Post by introinc » Wed Mar 04, 2020 5:48 am

Thanks so much for recommending Bill Aske. Is he in the directory? Contact info?

Dave Czirr
Moderator
Posts: 5078
Joined: Tue Jun 16, 2009 5:30 am
Location: New Jersey

Re: Transmission re-builders

Post by Dave Czirr » Wed Mar 04, 2020 6:08 am

Yes, Bill is listed in the Packard Club membership directory.

introinc
Posts: 10
Joined: Sat Aug 03, 2019 11:07 am

Re: Transmission re-builders

Post by introinc » Wed Mar 04, 2020 6:21 am

Thanks I found him as the Director of the Mid Atlantic Packard Club. Assume he is the same Bill. 41packard120@gmail.com, I searched Bill Aske in the directory but no result. Thanks for the quick reply

introinc
Posts: 10
Joined: Sat Aug 03, 2019 11:07 am

Re: Transmission re-builders

Post by introinc » Wed Mar 04, 2020 6:23 am

I searched just Asked and found him. Thanks again David.

Post Reply