Heater control valve

[packuk]

Does anyone know the part number for attached item can’t find it in parts book
It’s on a 41 clipper 8 cyl
It’s weeping coolant been cleaned up etc
Was it upgraded on later models

E2A5BFD4-9FF9-4A8A-8B03-2DED9CF49C69.jpeg

(285.66 KiB) Downloaded 34 times

[Dave Czirr]

Since the heater itself was an accessory and not standard equipment, the valve is probably listed with the accessory equipment section of the parts list. And your looks like a later generic replacement, not the original. Modern replacements are commonly available. Or you can disassemble and service yours and add new packing to the stem.