Page 1 of 1

Hood removal 1938 1608

Posted: Sun Jan 06, 2019 1:18 pm
by Bluedevil
I am trying to remove the hood from my '38 1608. I have removed the 2 x 7/16" bolts over the radiator in the front and that is loose. What else needs to be disconnected at the firewall end?

Thanks

Bill

Re: Hood removal 1938 1608

Posted: Fri Jan 11, 2019 9:14 pm
by classic car fan
If it is similar to my 1201 there should be 2-3 nuts/bolts at the cowl end of the hood, in the center section. I accessed them from under the dash. I hope my memory is correct and this helps.

Re: Hood removal 1938 1608

Posted: Sun Jan 13, 2019 1:27 pm
by Bluedevil
Thanks for the info. I saw some bolts under the dash, not easy to get to. I will work on them.