Page 1 of 1

1936-37 Fender

Posted: Thu Dec 02, 2021 8:22 am
by Herbybug
I have been told that a fender that I have could be for a 1935-36 120, a 1937 115 or a 1937 120. How do I determine which it is?

Re: 1936-37 Fender

Posted: Sat Dec 04, 2021 3:22 pm
by Dave Czirr
Lacking a response from someone who has previously been thru this exercise, one approach would be to use the Packard parts list and make a list of which years and models of those of interest used the same fender (same part number). Then contact club members in your area who have those vehicles, bring a tape measure, and compare measurements to those you've taken from the fender in question.

Re: 1936-37 Fender

Posted: Sun Dec 05, 2021 3:35 pm
by Don Shields
We need some more information to pin down what models and years the fender may fit. Is it a front or rear fender, is it left or right side? If it's a front fender, does it have the well for a side-mounted spare tire or is it without the well? Right off the bat if it's a front with a well it won't fit a 115 and 115s use different front fenders from the 120s. This is according to the 1935-41 Parts List; the fenders are listed starting on page 172.

Re: 1936-37 Fender

Posted: Thu Dec 30, 2021 1:38 pm
by TooManyCars
I have a 37 115 that's out in the shop. I can take measurements/photos if you like.