2ND/3RD Series Round Tail Light

Discussions related to electrical and fuel system, gasoline, etc.
Post Reply
Friartuck
Posts: 8
Joined: Mon Aug 02, 2010 4:33 am
Location: Red Bank, New Jersey (USA)
Contact:

2ND/3RD Series Round Tail Light

Post by Friartuck » Wed Aug 11, 2010 10:36 am

Looking for dimensions and pictures of a 2nd or 3rd series round tail light, tail light bracket, and license plate bracket. Pictures of how it attaches to the chassis, pictures of the bezel and body of the light. Also need any unique markings or engraving on the body like ELITE or C.M HALL. Should look like the attached rendering. Would be really helpful to have with brake light illuminated to show STOP. Can e-mail direct to friartuck@monmouth.com

Thanks,

Chris Wantuck
Attachments
roundtaillight.jpg
Chris Wantuck
3rd series Runabout

Dave Czirr
Moderator
Posts: 5078
Joined: Tue Jun 16, 2009 5:30 am
Location: New Jersey

Re: 2ND/3RD Series Round Tail Light

Post by Dave Czirr » Wed Aug 11, 2010 10:42 am

Chris, I have nothing to help you but since you're local, why not just drive down to Steve Babinsky's after Pebble Beach and take a look at his 2 very original 2nd Series cars?

Friartuck
Posts: 8
Joined: Mon Aug 02, 2010 4:33 am
Location: Red Bank, New Jersey (USA)
Contact:

Re: 2ND/3RD Series Round Tail Light

Post by Friartuck » Wed Aug 11, 2010 12:27 pm

Dave, This is a good idea and I'll follow-up with it. The part numbers between the six and eight models appear to be the same: 128155, 130000, 135115 or 133404. Subtle differances between them such as lens size. :D
Chris Wantuck
3rd series Runabout

DonaldEllis
Posts: 24
Joined: Sat May 08, 2010 3:17 pm

Re: 2ND/3RD Series Round Tail Light

Post by DonaldEllis » Mon Aug 23, 2010 6:17 am

Dave: I'm looking for lenses for my taillight shell. My shell is straight and usable but save for the clear license tag lens, I have no other glass. Does anyone reproduce these? Donald

DonaldEllis
Posts: 24
Joined: Sat May 08, 2010 3:17 pm

Re: 2ND/3RD Series Round Tail Light

Post by DonaldEllis » Mon Aug 23, 2010 2:14 pm

Chris: I have a 22-23 Single Six with the license plate bracket and mounting for the tail light. I also have the third series shell with no glass. I would be happy to photograph these and put them on this site if this would help you. Donald

Post Reply