53 Clipper emergency brake hardware

Discussions related to braking systems.
Post Reply
akluender
Posts: 3
Joined: Tue Apr 17, 2018 2:34 am

53 Clipper emergency brake hardware

Post by akluender » Tue Apr 17, 2018 2:55 am

Does anyone know the Bendix part numbers, or a source, for the emergency brake levers (1 vertical and 1 horizontal) inside the rear drums on a '53 Clipper? I can order new e-brake cables, but the lever hardware (and springs & clips) are missing from the Clipper I recently purchased. Service brakes work OK, but it would be nice (& safer) to have parking brake capabilities. Thanks in advance.

User avatar
JD in KC
Posts: 320
Joined: Sun Jul 12, 2009 8:45 pm
Location: Kansas City, Missouri

Re: 53 Clipper emergency brake hardware

Post by JD in KC » Tue Apr 17, 2018 5:56 am

I believe the parts you are looking for were used on all 1948-54 Packards (not including commercial vehicles). I'd try Kanter and/or Max Merritt. I'm assuming you are looking for Group 1.414 and 1.415.
Attachments
Capture 4.JPG
Photo Credit: PackardInfo.com

Don Shields
Posts: 110
Joined: Mon Aug 10, 2009 7:33 pm
Location: Philadelphia, PA

Re: 53 Clipper emergency brake hardware

Post by Don Shields » Tue Apr 17, 2018 6:43 pm

Another possible source would be Bob Stoltzfus of Bob's Packard Parts in Marietta, PA, phone 717-426-1446.

Post Reply